Ignitionmate Duo TS-92 ignition tester

General characteristics

The compact, peak voltage, dual-display ignition tester that makes it easy to repair ignition problems on V-twin or multi-cylinder engines, or even compare signals from two different engines.
Ignition signals are fast, high-voltage energy pulses that can damage even a good quality digital multimeter, while the IgnitionMate DUO system has been specially designed to dynamically measure and display both primary and secondary ignition signals in a bar graph displays with bright LEDs

Special features

The application of this versatile tool is based on two basic aspects; It works with different ignition systems (AC-CDI, CC-CDI, transistor, magnet, coil and "points") The ignition systems have the same basic components, in which that the signals obtained are usually similar in nature and magnitude.

It is not necessary to disassemble the ignition system components.
This avoids introducing or correcting poor contacts in the system, which can lead to confusion and delay the identification of real problems. The same signal can be compared in two different cylinders, including; Secondary high voltage scales / peak voltages of 20, 40 kV: use the induction clamp to measure the high voltage between the ignition coil and the spark plug.
SPARK Current: Measure the consistency of the high voltage spark current signal for misfire.
Low Primary Voltage / 400 Vpk Peak Voltage Scales: Use the RED and BLACK siliconized test leads to measure the primary ignition coil voltage (input power)

Technical characteristics

CYLINDERS: 2

METHOD: Compare and display the same signal on two different cylinders

SCREEN / RESOLUTION: 2 high-brightness 40 LED screens

SELECT / SET; Center selector: 400 VPK, 20 kV, 40 kV, SPARK.

KV VOLTAGE POLARITY: each screen independently. (Single output coils have negative signals, while dual output coils have negative and positive signals.)

REFERENCE: Select the left or right screen as a reference (for example, select a good engine or cylinder as a reference).

SPARK SENSITIVITY: Coarse or precise selection of spark signal damping

POWER ON/OFF, including “auto-off” if no signal is measured.

POWER: 7.2V rechargeable NiMH battery with 6 hours of battery life, external 12V DC power (11-15V DC).

STYLE/INCLUDED: Standard kit includes instrument with a molded polyurethane and polycarbonate, impact and water resistant composite housing with durable polycarbonate labels and rubber sealed and protected switches, 2 pickups with induction clamp calibrator with silicone cable, 2 silicone test leads with alligator clips and 2 sets of Probulator back probes, plus a 200 cm (6.5 ft) 12 V DC electrical lead, an instruction manual and a quick reference guide, all included in a personalized briefcase.